Clark County
Window Replacement & Installation in Camas, WA
Window replacement and installation in Camas, WA for older downtown homes and newer builds. Free in-home measure, then a written estimate first.
Clearview job photo — not specific to Camas
Camas is an old mill town with a real downtown core, plus newer growth pushing north and east toward Lacamas Lake. The housing is very different in each part of the city.
Housing in Camas
Downtown and the streets around it carry original early-1900s construction: settled frames, older sashes, and sills that have taken a century of Camas rain. North and east Camas is the opposite, with recent subdivisions, generally solid windows, and the occasional builder-grade window worth a second look.
What tends to go wrong
In the old mill-town core, the problem is usually the frame more than the glass. A sill or jamb may have moved enough over the decades that a new window will not sit right without more work at the opening (see what each opening needs). In the newer subdivisions, problems are rarer and smaller: an early seal failure, or hardware that never worked quite right.
Permits in Camas
Camas’s permit list shows doors and windows as needing a permit. A like-for-like replacement needs no plans, and the permit is generally issued the day you apply. A new or resized opening needs plans. Rules change and exceptions apply, so confirm for your address. The details, with sources, are in our permit guide. We talk through permits with you before work starts.
What we do here
We do window installation in both parts of Camas: replacing older downtown windows and setting new-construction windows on the builds still going up toward Lacamas Lake. A Camas job gets a written estimate after we see the openings, and the same flashing and finish standard as the rest of Clark County.
We also work in Battle Ground, Brush Prairie, La Center, Ridgefield, Vancouver, Washougal, and Woodland.
Looking at siding instead of windows? We take siding work in Camas too: fiber cement and wood siding.
Real work, real jobs
What we actually install.
Every photo below is a real Clearview job — not stock, not staged. We don't tag which town each one was shot in, so we won't claim these three are in Camasspecifically; they're a fair sample of the finished result you'd get here, installed to the same standard.
Questions from Camas homeowners
Do I need a permit to replace windows in Camas?
Camas's published permit list shows doors and windows as needing a permit. For a like-for-like replacement the city says no plans are required, and the permit is generally issued the day you apply. A new opening or a different size needs plans. Rules change, so confirm with the Camas Building Division for your address.
Does the old downtown core need different windows than a newer North Camas subdivision?
Usually a different amount of work, not a different product. Downtown's original sash tends to need more work because the frame itself has settled with age; North Camas houses are newer and more often need less. We tell you which on site.
Are builder-grade windows in newer Camas subdivisions actually a problem?
Not automatically — plenty are fine. Worth a second look if you're already noticing drafts or condensation on a house built in the last 10–15 years, since that points to the unit, not the age.
Do you handle new construction near Lacamas Lake?
Yes. See new construction for the opening schedule and rough-opening details we work from on a build.